Front Logics

Its been a while since I have posted any progress. That's mostly due to a very slow collecting of parts and the need to replace some tools.

Now that I'm back to work on my dome, I finished sanding the HP holes and went to work on the Logic panels. When I finished cutting the front logic area, I put the surrounds in place only to find that they were not well adjusted to the thickness of my dome.

Apparently the thickness of the 300mm dome is greater than that of the C&J domes and others. Its a positive thing because the dome is more sturdy but when both inner and outer dome are put together, the thickness is great enough that the logic panel is recessed.

Not all of the pictures taken came out, but here is one that shows the logics looking perfectly placed. The problem is that what you are seeing is only the inner dome. The outer thickness hasnt been added yet. All in all I think its a couple of mm short.














I'm not sure how to handle the problem yet. I considered filing down the outside of the logics so that they would sit flush, but that runs the risk of messing up the perfect curve on the face. Another option would be to take a little off of the inner dome.

I'll post the results when I know what I'm going to do.

First Cuts

Last weekend Chris James came over and helped me with the first cuts to the inner dome.

I had to learn the ways of the force, such as, finding the center of a circle and how to use a hole cutter.

We had some laughs as I got started, but all was well in the end.













I confess that I wasnn't very nervous cutting the holes for the PSIs or the HPs, but when I started on the pie panels I definitely felt the fear.



















I still have pie panels left to cut, as well as the fire extinguisher door. I also need to cut the logic holes but there isn't any use for that until I have the logic surrounds.

Maker Faire Interview

While at Maker Faire last weekend we did a lot of talking with people about how to build droids. It stands mentioning because usually at Con's people just love R2 for who he is, they get their pics and move on. They don't really consider what it takes to make him work, or anything.

While Chris was on break I did this interview in his place. Gerard didn't want to get in front of the camera, so he just pointed them to me (I guess he already has my personality nailed). I just thought I would share my moment in the sun with my readers (all 2 of you). Please forgive the sound levels. It was a noisy warehouse and required talking loudly to be heard, which would have been fine if they had done some editing for the final product.



Here is another one from Education Day.

Attaching the Rockler Bearing

It was a good weekend at Maker Faire. We won 4 "Editor's Choice" awards, and they can't wait to have us back again next year. We also made it into the NY Times and the Official Star Wars Blog.

Monday was like Christmas. My Rockler Bearing and my center foot arrived. The center foot box had been cut open for inspection. I guess Homeland Security doesn't like small, heavy packages that contain large amounts of steel.

So, tonight I finally had time to head to the garage and work on mounting my bearing.

First, I removed all of the little rubber feet that are inserted into the rings. I tapped up the bearing with masking tape to prevent metal flakes from ruining it, and marked out the areas on the outer ring where the rubber feet had been removed.

The v4 Frame is tapped in 4 places for a 1/4" screw, so I marked off 4 of the 8 partial holes for drilling out. Once the holes were drilled and the tape CAREFULLY removed I checked the holes to be sure that everything fit well.

With that done, I added the 3 screws to the inner ring that will be used to hold the dome and dome plate in place.







All that was left after that was bolting the bearing into place with the 4 screws. I used a split lock washer and a lock nut on each one.

Now that I have that done, its back to the waiting game again. I am currently waiting on my PSI's and my 300mm Dome to arrive.

I'm also trying to find a way to get in on both of the current runs of aluminum legs and steel outer feet which is difficult when you are on a budget.

I think that budget and run timing will continue to be a problem for me. I was introduced to the group by Chris, who has built an impeccable droid, with all aluminum. After seeing such an amazing piece of work, I have a hard time compromising on other materials for parts.

Having said that, I will probably be using resin for any of the blue parts and also for the half moon foot details. That will save me some money (and weight) without compromising the look in any way.

Frame Complete

Today I received and assembled my v4 JAG frame.

This weekend it will be on display at Maker Faire in the San Mateo Fair Grounds. The Bay Area R2 Builders will be exhibiting 2 (Chris James' and Gerard's) R2-D2's. My frame will be there to show the early steps to getting started.

I am currently waiting on my 300mm Dome, Steel Center Foot, PSI's and Rockler Bearing.

Complete part layout (below)

Assembled Frame (below)

First Paint Tests

Today I started testing the paint that I picked up over the weekend. It comes in three cans. A base coat, a color coat and a clear top coat.

To test these out, I cut apart an aluminum can and started spraying. After adding the minimum number of secondary coats and no clear coat, this is what my torn up can looks like:

Single overhead light and flash (above)


Light from all sides and flash. Shows the full range of color shift.(above)


Light from all sides, no flash and extreme angle (above)

The pics with the multiple light sources resemble what the paint looks like outside. I still need to test it a little more in areas with a lot of overhead florescent lights to be sure that it will look good on a convention floor.

Note: I did the base coat in my garage last night and the limited lighting was tricky on the eyes. The large piece of aluminum was not well covered with the base paint and it shows (at least to me).

So, for anyone reading this let me know what you think of the color scheme. If you know anything about lighting and this sort of paint, give me feedback on the pitfalls or benefits of going this route.

Peace.

The Road Less Traveled

Its been a while since I started on this process and I have learned a few things. If you don't have access to a machine shop, building a solid droid will be a long and expensive process.

As a result, I have become a parts collector. As people with certain skills pump out a set of parts I need, I have to get in on it or wait a long time until the event occurs again (like waiting for Haley's Comet as far as I'm concerned).

Being a parts collector is not too bad, but keeping the available cash to purchase things when they are available is the tough part. Most people are like me, living on the edge. With a clergy salary that only pays the mortgage (literally) and living off of the second income of my wife/secretary, I have turned to collecting recyclables from everyone I can so that I can redeem them for droid money.

Its a bit ironic I guess, recycling all that aluminum so that I can purchase more aluminum. My friends hear me constantly say, "If you throw that can away, you are stealing from R2! Hes crippled and needs feet you barbarian!"

So on to the actual meaning of my post title...

I have decided that I don't want to make just another R2-D2. There are several of those out there (at least 2 completed here in the SF Bay). I want to do a custom job, providing the paint that I want comes out correctly when applied.

My wife had the idea of using color change auto paint to replace just the blue parts of R2. I wasn't sure what it would take to do that but found that the paint was readily available at Kragen Auto Parts. (Photoshopped concept to the left)

Providing it all works out and he looks good that way, I figured on calling him R2-XS since his colorful bling looks to be a little bit in excess.

It is also worth noting here that I have started using the Droid Cost Summary sheet. I uploaded it to Google Documents so that I can share it with my wife.

I went through and populated it with all of the parts I can name and added URLs or names of people where the parts can be purchased. It helped me create a comprehensive checklist as well as organize all of the URLs to various hobby stores that were beginning to clutter my favorites list.